25 ton Biyu Girder Nau'in Gadar Turai Nau'in Gadar Crane don Injin Shuka Featured Hoton

25 ton Double Girder Nau'in Gadar Turai Nau'in Gada don Shuka Mashin

Takaitaccen Bayani:

Ƙwararrun igiyoyi biyu na Turai suna da fa'ida na rage yawan zuba jarurruka na abokin ciniki, yin cikakken amfani da sararin samaniya, inganta ƙarfin samarwa, haɗin kai mai kyau, aminci da aminci, da ƙananan rashin nasara.

Ƙarfin ɗagawa:5-50 ton

Tsawon tsayi:10.5-31.5m

Tsawon ɗagawa:6-12mts

Aika mana imel

Cikakken Bayani

Tags samfurin

Bayani

AQ-NLH biyu girder gada crane kayan aikin ɗagawa ne na Turai.Ya bambanta da sauran cranes biyu na al'ada na al'ada saboda yana da ƙananan ɗaki, ƙaramin tsari da kuma siffa mai laushi.Ƙimar ƙaƙƙarfan ƙawancen Turai biyu girder sama da crane yana ɗaukar fasahar ci gaba da ƙirar ƙira, yana mai da shi cikakkiyar zaɓi don ɗagawa lokatai inda suke buƙatar ingantaccen matakin inganci da aminci.

Fasalolin Crane Sama:

1. Maɗaukaki masu mahimmanci guda biyu, nau'in nau'in akwatin da aka yi ta hanyar yin amfani da shi;
2. Babban ingancin carbon karfe Q235B da Q345B;
3. Gindibi biyu da aka haɗa ta babban ƙarfin sukurori;
4. Ana gwada suturar walda ta hanyar X-ray da duban dan tayi;
5. Ƙarƙashin ƙafafu;
6. Ƙaƙƙarfan tsari, ƙananan ƙararrawa da trolley mai nauyi;
7. Dagawa inji ne bude irin winch trolley;
8. Ƙaƙwalwar ƙirar motar motar, mataki ƙasa da iko, kayan aiki masu taurara da birki mai aminci;
9. Kyakkyawan aiki mai kyau, mataki na rage saurin gudu da gudua hankali;

Sigar Fasaha Na Nau'in Turai Gindi Biyu Sama Crane
iyawa(T)	5	10	16	20	32	50
Tsayin (M)	10.5---31.5
Tsawon ɗagawa(M)	6---12M
Aikin Aiki	M5
Saurin ɗagawa (m/min)	0.8/5	0.8/5	0.66/4	0.53 / 3.4	0.8 / 3.3	0.53 / 3.2
Saurin hawan (m/min)	2---20
Gudun Crane (m/min)	3---30
Yanayin aiki (℃)	-25--40
Ya kamata a tuntuɓi takamaiman sigogi tare da masana'anta

HYCrane VS Wasu

Kayan mu

1. Tsarin sayan albarkatun ƙasa yana da tsauri kuma an duba shi ta hanyar ingantattun masu duba.
2. Abubuwan da aka yi amfani da su duk kayan ƙarfe ne daga manyan masana'antun ƙarfe, kuma an tabbatar da ingancin.
3. Tsaya lamba cikin kaya.

1. Yanke sasanninta, asali amfani da farantin karfe 8mm, amma amfani da 6mm ga abokan ciniki.
2. Kamar yadda aka nuna a hoton, ana amfani da tsofaffin kayan aiki don gyarawa.
3. Sayi na ƙarfe mara nauyi daga ƙananan masana'antun, ingancin samfurin ba shi da tabbas.

Sauran Alamomin

Kayan mu

1. Mai rage motoci da birki tsari ne na uku-biyu
2. Low amo, barga aiki da low tabbatarwa kudin.
3. Sarkar hana saukar ruwa da aka gina a ciki na iya hana bolts daga sassautawa, da kuma guje wa cutar da jikin dan Adam sakamakon faduwar mota ta bazata.

1.Old-style Motors: Yana da hayaniya, mai sauƙin sawa, ɗan gajeren rayuwar sabis, da ƙimar kulawa mai yawa.
2. Farashin yana da ƙasa kuma ingancin yana da rauni sosai.

a
S

Sauran Alamomin

Dabarun mu

Dukkanin ƙafafun ana yin maganin zafi kuma an daidaita su, kuma an lulluɓe saman da man hana tsatsa don ƙara ƙayatarwa.

1. Kada a yi amfani da canza yanayin wuta, mai sauƙin tsatsa.
2. Rashin ƙarfin ɗaukar nauyi da gajeriyar rayuwar sabis.
3. Ƙananan farashi.

s
S

Sauran Alamomin

Manajan mu

1. Mu inverters kawai sa crane gudu mafi barga da aminci, amma kuma kuskure ƙararrawa aiki na inverter sa kiyaye crane sauki da kuma mafi hankali.
2. Ayyukan daidaitawa na inverter yana ba da damar mota don daidaita ƙarfin wutar lantarki bisa ga nauyin abin da aka ɗaga a kowane lokaci, ta haka ne ya adana farashin masana'anta.

Hanyar sarrafawa ta hanyar sadarwa na yau da kullum yana ba da damar crane don isa iyakar iko bayan an fara shi, wanda ba wai kawai ya sa dukkanin tsarin crane ya girgiza zuwa wani mataki a lokacin farawa ba, amma kuma sannu a hankali ya rasa rayuwar sabis. motar.

Sauran Alamomin

Aikace-aikace & sufuri

ANA AMFANI DA SHI A FANANU DA YAWA

Gamsar da zaɓin masu amfani a ƙarƙashin yanayi daban-daban.
Anfani: ana amfani da shi a masana'antu, ɗakunan ajiya, kayan haja don ɗaga kaya, don saduwa da aikin ɗagawa na yau da kullun.